Cardale Thermaglide replacement 433MHz handset (2004 - 2006)
£28.29 (INC VAT - £33.95)
Liftmaster Genuine Service Kit - 041A3261-1 & 041A2817
£82.46 (INC VAT - £98.95)
Universal Garage Door Remote Control Radio Upgrade Receiver Kit – Up & Over Doors
£54.13 (INC VAT - £64.96)
| Weight | 580 kg |
|---|---|
| Dimensions | 10 × 10 × 6 cm |
Description
- 1 x Universal garage door remote control receiver kit
- This radio control sets provide a fast and easy solution to upgrading older garage door remote control handsets and receivers particularly when the original parts are no longer available and the only option seems to be a new opener.
- Radio frequency: 433MHz – Rolling Code
- Kits comprises two mini-keyring four channel handset, a four channel receiver, UK 24V adapter, 1m of bell wire, batteries and full instructions
- rolling code
- Please note that this receiver kit will work with a wide range of makes and models which have the capability of having a wired bell push/push button.
- Extra handsets available in our related products area below
Reviews (4)
4 reviews for Universal Garage Door Remote Control Radio Upgrade Receiver Kit – Up & Over Doors
Shipping & Delivery
Derek Addison –
Purchased this kit to replace an old Henderson unit (25+ years old). I found it easy to fit and it works well. I like the idea of a separate PSU – it enables the relay contacts to be kept "potential free" which could be useful if troubleshooting. DIY installers should note that the terminal screws are VERY small, and that a standard sized electrician’s terminal screwdriver will not fit them. I have instrument screwdrivers, so this was not a problem for me. I would also say that the bell wire supplied with the kit is awful – it snaps too easily and is consequently difficult to strip to the desired length. I used a short length of intruder alarm cable (7/0.2) for the short link between the motor unit and the receiver.
Service from GDL was good.
Derek Addison –
Purchased this kit to replace an old Henderson unit (25+ years old). I found it easy to fit and it works well. I like the idea of a separate PSU – it enables the relay contacts to be kept "potential free" which could be useful if troubleshooting. DIY installers should note that the terminal screws are VERY small, and that a standard sized electrician’s terminal screwdriver will not fit them. I have instrument screwdrivers, so this was not a problem for me. I would also say that the bell wire supplied with the kit is awful – it snaps too easily and is consequently difficult to strip to the desired length. I used a short length of intruder alarm cable (7/0.2) for the short link between the motor unit and the receiver.
Service from GDL was good.
Derek Addison –
Purchased this kit to replace an old Henderson unit (25+ years old). I found it easy to fit and it works well. I like the idea of a separate PSU – it enables the relay contacts to be kept "potential free" which could be useful if troubleshooting. DIY installers should note that the terminal screws are VERY small, and that a standard sized electrician’s terminal screwdriver will not fit them. I have instrument screwdrivers, so this was not a problem for me. I would also say that the bell wire supplied with the kit is awful – it snaps too easily and is consequently difficult to strip to the desired length. I used a short length of intruder alarm cable (7/0.2) for the short link between the motor unit and the receiver.
Service from GDL was good.
Derek Addison –
Purchased this kit to replace an old Henderson unit (25+ years old). I found it easy to fit and it works well. I like the idea of a separate PSU – it enables the relay contacts to be kept "potential free" which could be useful if troubleshooting. DIY installers should note that the terminal screws are VERY small, and that a standard sized electrician’s terminal screwdriver will not fit them. I have instrument screwdrivers, so this was not a problem for me. I would also say that the bell wire supplied with the kit is awful – it snaps too easily and is consequently difficult to strip to the desired length. I used a short length of intruder alarm cable (7/0.2) for the short link between the motor unit and the receiver.
Service from GDL was good.