Name: Roller Shutter Door Manual Crank Winding Handle - Hex End
Brand: Universal
SKU: 1587a7cf87f9
Availability: InStock

Roller Shutter Door Manual Crank Winding Handle – Hex End

£19.96 (INC VAT - £23.95)

Crank Winding Handle for Roller Shutter garage doors, blinds, canopy installations and awnings etcThe manual crank handle provides manual override operation in the event of a power cut or motor fai…

Crank Winding Handle for Roller Shutter garage doors, blinds, canopy installations and awnings etc
The manual crank handle provides manual override operation in the event of a power cut or motor failure etc and you should have one of these incase access is required
Used in conjunction with the Motor winding eye – see our related products area at the bottom of the page if you need this also
Overall length is 1.5m (1500mm)
This Crank handle has a an 8mm hex end to allow you to wind the motor directly. Please see our related products area below for our other crank handles which have a hook on the end which connect to a fixed winding eye which attaches to the motor.
The hex end on this crank handle is rounded at the end with a fixing screw. The purpose of this is to allow easier location of the crank handle into the motor then to push the hex bar into the motor hex socket. The fixing screw is to allow permanent fixture of the crank handle (if required). Please note, the crank handle can only be permanantly fixed to the motor if the motor drive is facing downwards at zero degrees.