Select Euro Lock Mechanism Assembly
£49.96 (INC VAT - £59.95)
Garador Options Relay - Series 4 Motor Units
£58.29 (INC VAT - £69.95)
Garador/Hormann BiSecur 868 Mhz HSE4 Remote Control Handset
£38.75 (INC VAT - £46.50)
| Weight | 560 kg |
|---|---|
| Dimensions | 10 × 3 × 3 cm |
Description
- 1 x Garador 4 Button Handset in Matt Black
- HSE4-868-BS remote control handset, to suit all Hormann and Garador 868 Mhz electric garage door openers.
- Backwards compatible with all Garador & Hormann operators on 868MHz 2005-2011
- The new ‘BiSecur’ Series 3 garage door remote control handset is suitable for current Garador and Hormann garage door openers, such as Ecomatic, Promatic, Supramatic and GaraMatic systems – can operate upto 4 garage doors
- Garador Part No: 7470, Hormann Part No: 4511736
- Microsized hand transmitter in matt black
- It is not a suitable replacement for older 40 Mhz handsets, with grey buttons.
- Battery & programming instructions included with this item – spare batteries available on our website and in the ‘additional products which may help area below
Reviews (8)
8 reviews for Garador/Hormann BiSecur 868 Mhz HSE4 Remote Control Handset
Shipping & Delivery
Related products
R Scott –
I’ve ordered parts for my garage doors that arrived promptly
R Scott –
I’ve ordered parts for my garage doors that arrived promptly
R Scott –
I’ve ordered parts for my garage doors that arrived promptly
R Scott –
I’ve ordered parts for my garage doors that arrived promptly
Ernest Wilkinson –
I ordered a new HSE4 remote control handset which arrived promptly – excellent service from GDL Garage Door Parts.
However, the Garador "Item 7 Teaching in a radio code" instructions were not completely accurate. Having followed the instructions the remote control still did not work. After a few attempts I did notice that code 11 was flashing on the operator and pressing the new handset button again caused the handset to function correctly. Perhaps this is why under "Item 6 Operation" in the "Operating Instructions" it says the hand transmitter must be pressed a second time.
Ernest Wilkinson –
I ordered a new HSE4 remote control handset which arrived promptly – excellent service from GDL Garage Door Parts.
However, the Garador "Item 7 Teaching in a radio code" instructions were not completely accurate. Having followed the instructions the remote control still did not work. After a few attempts I did notice that code 11 was flashing on the operator and pressing the new handset button again caused the handset to function correctly. Perhaps this is why under "Item 6 Operation" in the "Operating Instructions" it says the hand transmitter must be pressed a second time.
Ernest Wilkinson –
I ordered a new HSE4 remote control handset which arrived promptly – excellent service from GDL Garage Door Parts.
However, the Garador "Item 7 Teaching in a radio code" instructions were not completely accurate. Having followed the instructions the remote control still did not work. After a few attempts I did notice that code 11 was flashing on the operator and pressing the new handset button again caused the handset to function correctly. Perhaps this is why under "Item 6 Operation" in the "Operating Instructions" it says the hand transmitter must be pressed a second time.
Ernest Wilkinson –
I ordered a new HSE4 remote control handset which arrived promptly – excellent service from GDL Garage Door Parts.
However, the Garador "Item 7 Teaching in a radio code" instructions were not completely accurate. Having followed the instructions the remote control still did not work. After a few attempts I did notice that code 11 was flashing on the operator and pressing the new handset button again caused the handset to function correctly. Perhaps this is why under "Item 6 Operation" in the "Operating Instructions" it says the hand transmitter must be pressed a second time.
Your review is awaiting approval
I purchased a remote control handset 868 Mhz. Packing slip says ws441. The only instruction on how to use says"Place the transmitter to teach the code next to new transmitter to learn. Press and hold button on teaching, then same on button on learning transmitter.
Light on learning transmitter lights and stays red. Does not function to move door. Light on old transmitter starts red then turns blue and functions. I am standing in garage as instructed. What am I doing wrong to not be able to operate the new transmitter?
Any suggestions will be appreciated.
Your review is awaiting approval
I purchased a remote control handset 868 Mhz. Packing slip says ws441. The only instruction on how to use says"Place the transmitter to teach the code next to new transmitter to learn. Press and hold button on teaching, then same on button on learning transmitter.
Light on learning transmitter lights and stays red. Does not function to move door. Light on old transmitter starts red then turns blue and functions. I am standing in garage as instructed. What am I doing wrong to not be able to operate the new transmitter?
Any suggestions will be appreciated.
Your review is awaiting approval
I purchased a remote control handset 868 Mhz. Packing slip says ws441. The only instruction on how to use says"Place the transmitter to teach the code next to new transmitter to learn. Press and hold button on teaching, then same on button on learning transmitter.
Light on learning transmitter lights and stays red. Does not function to move door. Light on old transmitter starts red then turns blue and functions. I am standing in garage as instructed. What am I doing wrong to not be able to operate the new transmitter?
Any suggestions will be appreciated.
Your review is awaiting approval
I purchased a remote control handset 868 Mhz. Packing slip says ws441. The only instruction on how to use says"Place the transmitter to teach the code next to new transmitter to learn. Press and hold button on teaching, then same on button on learning transmitter.
Light on learning transmitter lights and stays red. Does not function to move door. Light on old transmitter starts red then turns blue and functions. I am standing in garage as instructed. What am I doing wrong to not be able to operate the new transmitter?
Any suggestions will be appreciated.